Home / Knowledge base / How to Set up Your Video Wall on the BG-UHD-VWP-1X4

How to Set up Your Video Wall on the BG-UHD-VWP-1X4

Trevon Martin • April 19, 2024

This guide will help you set up your video wall using the BG-UHD-VWP-1X4. If you encounter any issues, please reach out to BZBGEAR support for assistance.

Part I: Preparing the Unit for Operation

Connecting Inputs and Outputs:

- Ensure outputs are connected in the correct order. On the top of the unit, you’ll see the outputs numbered 1-4. If you’re unsure how to connect the outputs, output #1 is the TV on the far left or top, and #4 is the TV on the far right or bottom.

Establishing Communication (Recommended if you have a PC available):

- Connect the BG-UHD-VWP-1X4 to your system via Ethernet.

- If using Ethernet, and unsure of the IP address, press the [Info] button on the IR remote for details.

Installing PC Tool (Recommended if you have a PC available):

- Download and install the BG-UHD-VWP-1X4 PC tool from the BG-UHD-VWP-1X4 product page.

Alternative Control (Alternative method if a PC isn’t available):

- Use front panel buttons or the IR remote if a PC is not available for basic setup. You will need to have batteries for the IR remote.

Part II: Setting Up a Video Wall Using the PC Tool

Adjusting Output Settings:

- Ensure a clear output image by configuring resolution and EDID settings to match your setup requirements (resolution and refresh rate).

Configuring Video Wall:

- Open the PC tool and navigate to the video wall setup section.

- For standard layouts, access the [Quick Selection] menu and choose your desired configuration.

- For custom configurations, select [Custom Define] to personalize your layout.

Part III: Setting Up a Video Wall Without the PC Tool

Setting Resolution:

- Use the IR remote to adjust Input EDID settings (2160P60, 2160P30, 1080P60) to match your system's specifications. Note: 1080P is recommended, as it will work with most systems.