4x2 4K UHD HDMI Seamless Switcher Quad MultiViewer with Audio De-embedder

Configure the Perfect Solution
Get Started

Overview

The 4K@60 4x2 Multiviewer Seamless UHD Video Matrix Switcher is designed to allow you to display multiple video sources at 4K resolution on two screens. It combines four video signals and allows you to manage each input, create combinations of the four inputs, and adjust their positions on the displays.

Besides instant switching between 4 sources and routing to two displays the BG-UHD-MVS42MA has the ability to display the four video inputs in a Picture-in-Picture (PIP) or Picture-by-Picture (PBP) mode. In PIP mode, one of the video inputs is displayed as a small inset window on top of the other input, which takes up the majority of the screen. In PBP mode, the four video inputs are displayed side-by-side, taking up equal or partial amounts of screen space.

Connectivity and Quality

This device supports a wide range of input resolutions up to 4096x2160p 60Hz. It also could de-embed audio from any of the sources in different formats for your external audio system. Supported audio formats are LPCM, AC3, DD+, DTS, DTS- HD. User can control the volume of audio in LPCM format.

Control

Multiple control options are available for the BG-UHD-MVS42MA. It can be controlled through the front panel buttons, an IR remote, or RS-232 commands. EDID control is available through the RS-232 interface.

Features

  • material-symbols_shield-lock-outline
    Secure Content
    HDMI 2.0b, HDCP 2.2, and HDCP 1.x compliant
  • bi_badge-4k
    4K
    Input and output resolution up to 4K2K@60 4:4:4
  • bi_soundwave
    Audio formats
    LPCM, DD+, DTS, Dolby TrueHD, DTS HD-master pass-through
  • fluent_task-list-square-settings-20-regular
    Control Options
    Control via front panel buttons, IR remote, RS-232 commands
  • ep_connection
    EDID management
    Seamless scaling for the best results
  • check-square 3
    Compact design
    For easy and flexible installation
  • 18Gbps uncompressed Bandwidth
  • Seamless switching between input channels
  • Combined multiple images or independent layouts to display on two UHD TVs
  • Up to 8 display modes: Single, PIP, PBP(1), PBP(2), Triple(1), Triple(2), Quad(1), Quad(2)
  • Audio de-embedding via analog and optical fiber audio ports
  • Output scaling
  • Independent audio selection

Videos

4k Quad Multiviewer with Seamless Matrix Switching | BG-UHD-MVS42MA
4k Quad Multiviewer with Seamless Matrix Switching | BG-UHD-MVS42MA

Tech Specifications

Technical
HDMI Compliance HDMI 2.0b
HDCP Compliance HDCP 2.2 / 1.x
Video Bandwidth 18Gbps
Video Resolutions Up to 4K2K@60 4:4:4
IR Level 5Vp-p
IR Frequency 38KHz
Color Depth 8/10/12-bit
Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Audio Formats HDMI audio: PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio
Analog audio [3.5mm L/R]: PCM2.0
Optical fiber audio: Dolby PCM2.0/5.1/7.1CH, Dolby Digital/plus, DTS 5.1
ESD Protection Human-body model:
±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connection
Input ports 4 x HDMI IN [Type A, 19-pin female]
Output ports 2 x HDMI OUT [Type A, 19-pin female]
2 x L/R OUTPUT [RCA]
2 x OPTICAL OUTPUT [S/PDIF]
Control ports 1 x RS-232 [3pin-3.81mm phoenix connector]
1 x IR EXT [3.5mm Stereo Mini-jack]
Mechanical
Housing Metal Enclosure
Color Black
Dimensions 11”(W) x 5.1"(D) x 1.2”(H) [270mm(W) x 130mm(D) x 30mm(H)]
Weight 2lbs [906g]
Power Supply Input: AC 100~240V 50/60Hz
Output: DC 12V/2.5A (US/EU standard, CE/FCC/UL certified)
Power Consumption 15.72W (Max)
Operating
Temperature
32°F ~ 104°F / 0°C ~ 40°C
Storage Temperature -4°F ~ 140°F / -20°C ~ 60°C
Relative Humidity 20~90% RH (no-condensing)

PACKAGE CONTENTS

  • 1 x 4K60 4x2 Multiviewer Seamless UHD Video Matrix Switcher
  • 1 x IR Remote
  • 1 x 3pin-3.81mm Phoenix Connector (male)
  • 1 x 38KHz IR Wideband Receiver Cable (1.5 meters)
  • 2 x Mounting Ears
  • 4 x Machine Screws (KM3*4)
  • 1 x 12V/2.5A Locking Power Adapter
  • 1 x User Manual

Interfaces

Interfaces image
  1. Power button: Short press this button to power on the device. Long press this button for 1 second to enter the standby mode.
  2. Power LED: The Power LED will illuminate green when the product is powered on and red when the product is in standby.
  3. OUT 1 LEDs: Signal source indicator for HDMI OUT 1 port. In single screen display mode when the HDMI OUT 1 port outputs a signal from one of the HD 1/2/3/4 inputs the corresponding green LED will illuminate. In multiview mode all OUT 1 LEDs will illuminate green.
  4. OUT 2 LEDs: Signal source indicator for HDMI OUT 2 port. In single screen display mode when the HDMI OUT 2 port outputs a signal from one of the HD 1/2/3/4 inputs the corresponding green LED will illuminate. In multiview mode all OUT 2 LEDs will illuminate green.
  5. IR Window: IR signal receiving window.
  6. OUT 1 button: Input source switching button for the HDMI OUT 1 port which is only available on single screen display modes.
  7. OUT 1 Multiview button: Multiview display mode switching button for the HDMI OUT 1 port. Short press this button to cycle select: Single-PIP-PBP(1)-PBP(2)-Triple(1)-Triple(2)-Quad(1)-Quad(2)-single. Long press this button for 3 seconds to switch the aspect ratio (16:9/Full) for PBP(1) / PBP(2) / Triple(1) / Triple(2) / Quad(1) / Quad(2).
  8. OUT 1 RES button: Output resolution switching button for the HDMI OUT 1 port. Short press the RES button to cycle switch the output resolution of the HDMI OUT 1 port (Please refer to the output resolution list of “Video & Audio”). Long press the RES button for 3 seconds to switch the output resolution to 720P60.
  9. OUT 2 button: Input source switching button for the HDMI OUT 2 port which is only available on single screen display modes.
  10. OUT 2 Multiview button: Multiview display mode switching button for the HDMI OUT 2 port. Short press this button to cycle select: Single-PIP-PBP(1)-PBP(2)-Triple(1)-Triple(2)-Quad(1)-Quad(2)-single. Long press this button for 3 seconds to switch the aspect ratio (16:9/Full) for PBP(1) / PBP(2) / Triple(1) / Triple(2) / Quad(1) / Quad(2).
  11. OUT 2 RES button: Output resolution switching button for the HDMI OUT 2 port. Short press the RES button to cycle switch the output resolution of the HDMI OUT 2 port (Please refer to the output resolution list of “8. Video & Audio”). Long press the RES button for 3 seconds to switch the output resolution to 720P60.
  12. L/R OUT 1: PCM 2.0 Analog audio output port.
  13. OPTICAL OUT 1: Optical fiber digital audio output port.
  14. HDMI OUT 1: Connect to an HDMI display device such as a TV or Monitor with HDMI cables.
  15. L/R OUT 2: PCM 2.0 Analog audio output port.
  16. OPTICAL OUT 2: Optical fiber digital audio output port.
  17. HDMI OUT 2: Connect to an HDMI display device such as a TV or Monitor with HDMI cables.
  18. HD 1-4 INPUT ports: Connect to an HDMI source device such as Game Console or Set-top box with HDMI cables.
  19. RS-232 port: 3-pin phoenix connector, connected to a PC or control system for serial port upgrade or RS-232 command control.
  20. IR EXT port: If the IR signal receiving window of the unit is blocked or the unit is installed in a closed area out of infrared line of sight, the IR receiver cable can be inserted to the “IR EXT” port to receive the IR remote signal.
  21. DC 12V: DC 12V/2.5A power input port.